Tag Archives: backer

Simple Infrared PWM on Arduino, Part 3 – Hex IR Signals

In Part 1 of this series, we demonstrated how to send signals using soft or Simple Infrared PWM on Arduino. In our Part 2 post we looked at sending RAW IR signals – specifically a RAW NEC signal and a longer RAW Mitsubishi Air Conditioner signal using soft PWM. We have since improved the PWM method shown in Part 1 Part 2 to provide better performance and improve portability. In this Part 3, we will take the signals from Part 2 and show how to send them using their binary (or Hex) representation, which can save lots of SRAM in many projects, particularly when dealing with longer AC signals.

Original NEC 32-bit and Mitsubishi 88-bit Signals displayed using AnalysIR
Original NEC 32-bit and Mitsubishi 88-bit Signals captured using AnalysIR

Continue reading Simple Infrared PWM on Arduino, Part 3 – Hex IR Signals

Latest ‘New Year’ release of AnalysIR with full support for USB IR Toy and more.

Dublin, Ireland – 31st January 2014. We are happy to announce the latest ‘New Year’ release of AnalysIR to all our backers & supporters. Since the completion of the crowd-funding campaign on Indiegogo we have added over 125 updates and enhancements to AnalysIR, with more to come.

AnalysIR Screenshot
AnalysIR Screenshot

A major highlight of this release is full AnalysIR support for USB IR Toy from Dangerous Prototypes (V1 & V2 hardware) for decoding and resending IR signals at all common modulation frequencies. In our opinion, AnalysIR is now the premier GUI supporting DP’s IR toy, not to mention the Arduino, RPi, MSP430 F5529 LaunchPad (beta)  and more. A selection of enhancements in this latest release, include: Continue reading Latest ‘New Year’ release of AnalysIR with full support for USB IR Toy and more.

USB IR Toy – test release issued.

Today we issued a test release of AnalysIR, supporting V1 & V2 USB IR Toy loaded with firmware V22. If you have an IR Toy and want to test it out, leave a message with your email in the contact form at the top. Naturally, this is available only to backers with AnalysIR. You can support our project and get a copy of AnalysIR via the option at the top of this page.

Continue reading USB IR Toy – test release issued.

Crowdfunding Campaign Update – 23rd Oct 2013

Hello Backers,

We have been busy over the last few weeks updating AnalysIR, for you. We hope to make the next release at the end of this month around Halloween.

You may not know that Halloween originated in our part of the world, but we promise not to introduce too many scary features this time 🙂 .

Our next release will include a number of Updates & fixes as follows: Continue reading Crowdfunding Campaign Update – 23rd Oct 2013

Download details are on the way..;

Hi Backers

We have just started emailing the download intructions for AnalysIR.

If you have not received your email within the next 3 hours, please send us a message vis IGG or directly via email. info@A?????IR.com.

 

tnx

Announcement: AnalysIR – full roll-out

Hi All

Just a ‘heads up’ to let all backers know that we plan to issue the next release of AnalysIR to everyone within the next 12 hours, as originally planned.

During the last 4 weeks we have received both valuable & contructive feedback, resulting in over 100 Updates or fixes and which also include a selection of new bonus features. As with all new Software, we expect to have more issues reported and we will continue to issue new releases with fixes and additional features monthly or weekly until then end of 2013, as required.

We are very excited about AnalysIR and thanks to the great feedback & suggestions received so far, it is now a much more feature-rich and comprehensive tool than we ever imagined when we embarked on this campaign. We would encourage you all to continue suggesting enhancements and reporting any issues or usability improvements over the coming months.

Download & installation instructions will be contained in the email to be issued later directly to backers. This will be an 0.9.x release and we hope to upgrade this to a 1.0 release before the end of the year.

Thanks again for all your support!

Update: AnalysIR Phase 1 roll-out, Arduino Due

Just a quick update to let you know how things are progressing with the phase 1 roll-out.

Today we have issued our 2nd release to the initial participants which includes 22 updates and fixes to AnalysIR plus many other updates to the User Guide. AnalysIR has benefited greatly from the feedback received with a bonus of more features added.

We have recently received an Arduino DUE and have succeeded in porting our existing Arduino code to this new device. The porting was surprisingly quick and very few changes were required, which is all credit to the Arduino Team for making it so easy for us. The DUE code will be merged into our release cycle sometime over the next month or so.

So far we have had mainly positive results on the Arduino platform. However, the Raspberry Pi platform (RPi) is presenting more challenges than anticipated. The good news is that we believe we have a workaround for RPi and we will work on resolving any trailing issues over the next weeks. Another aspect of the RPi roll-out is that it requires greater knowledge of things such as Linux, networking and compiling on the RPi for users. We will put some thought and effort into trying to simplify this experience – but this may take more time than anticipated. Arduino is just so easy to use…..

At this time, we would also like to open up the phase 1 roll-out to another 10 backers on a first come basis. So the first 10 emails to arrive in our inbox, from backers, will receive an invitation. You can use the IGG message feature for this or just email info@A?????IR.com (replace the A?????IR with our name). To participate you will need an Arduino or RPi and an IR receiver and of course time.

At this point we still expect to release AnalysIR to all backers in or around Sep 30th.

Finally, many thanks again for all your support and patience.

Update: AnalysIR availability & roll-out plans

Hi All!

I just received an email from one backer enquiring about when AnalysIR will be available for download. Here is an edited copy of our reply, in case any other backers have the same question.

As described on the main Campaign page & updates – we have already issued an invitation email for the phase 1 roll-out, which will begin next week and runs for the next 2-3 weeks. The ‘phase 1 invitees’ were selected as per the criteria on the main campaign page (early backers & backers who contributed the most)

If you did not receive an invitation for phase 1, you will receive an email with details on how to download and register AnalysIR after the phase 1 roll-out is completed. (Hopefully in less than 3 weeks or before September 30th 2013).

Thank you for your understanding and support.

The AnalysIR team

Quick update: Kits are ‘in the air’ & Getting Started Guide

Quick update:

All IR starter Kits are ‘in the air’ and on their way around the world, including the ones requested this week.

We have completed updating the Getting started guide and have installed a website CMS, discussion forum & bug tracking system on our website. However, we don’t plan to expose anything on our website just yet.

We will continue to work through our task list for the remainder of this week.

…..more later.

Campaign completes successfully at 208% of Target & 150 Backers

Wow, what a couple of months this has been with over 1,300 emails received, new partners, over 4,168 referrals to the campaign, 208% funded, several world firsts with IR on Arduino & Raspberry Pi and most importantly backed by 150 people from 32 Countries across the globe. Not to mention some great bonus features added to AnalysIR along the way, some of which have been inspired by our backers.

Our tasks for the next week include, progress on the following:

– Documentation
– Installation Package for download
– Some bug fixing
– Online bug tracker
– Online discussion board
– Web site
– Select & Issue email Invitations to 1st phase roll-out participants
– Ship remaining kits.

I would like to finish up this update by welcoming our latest backers and thanking all our backers for your support.

The AnalysIR Team