Monthly Archives: May 2014

Poor maker’s Infrared receiver #2

Our recent post about the silver bullet IR receiver proved very popular and we promised that we would follow-up with another variant of the poor maker’s Infrared receiver. This time we are using an IR Led (emitter), 2 resistors and any standard Arduino. You will also need to download the Arduino code provided below, compile and upload it. One of the most common problems encountered when trying to decode IR signals is that makers don’t always have the appropriate IR receiver for the job in hand or have to wait for one to be delivered by mail. Here we present an affordable method to allow you to use any IR emitter (LED) as a receiver and as a bonus we are publishing the Arduino code to make it all work.

Circuit Diagram: Poor maker's IR Receiver
Circuit Diagram: Poor maker’s IR Receiver

Continue reading Poor maker’s Infrared receiver #2

‘Silver bullet’ – the Oscilloscope Infrared Receiver

A while ago we came across a website on infrared remote controls which suggested a simple way to view IR signals using an Oscilloscope. The idea is to use a standard IR Led mounted into a BNC/RCA plug using a spare channel  making an Oscilloscope infrared receiver. So we set about ordering the connectors, which arrived in the post today. Another way of looking at this device is as a ‘poor-mans’ IR receiver, but if you have an Oscilloscope to plug it into then maybe you are not so poor after all.

Silver Bullet - Infrared Receiver connected to Channel 1
Silver Bullet – Infrared Receiver connected to Channel 1

Continue reading ‘Silver bullet’ – the Oscilloscope Infrared Receiver