We are excited to announce our newest product KontroLIR – the first Arduino compatible IR remote control. Users can now design their very own Infrared remote to work exactly how they want. The possibilities are unlimited. Customize the fully featured firmware within the Arduino IDE to your own needs or just add your own signals to the pre-configured 5 device/225+ buttons. Sketches are uploaded over Serial USB I/F from the Arduino IDE – just like any other sketch. KontroLIR features an ATmega328PB, a high power emitter, an indicator LED and is powered by 2xAAA alkaline batteries. Low power operation is already implemented with ~1uAmp idle current for long battery life. Available options include IR Receiver, IR Learner, 16 to 256KBytes I2c EEPROM and a serial USB adapter for uploading your sketch from the IDE. KontroLIR supports IRremote, IRLIB and is tightly integrated with our own AnalysIR Application.
Following the release of our highly popular A.IR Shield Nano, we have received numerous requests about using the module with platforms other than Windows. Because the module uses a standard Serial USB interface for communicating, experienced users can easily integrate it into any other platform. To assist other users we have now released an A.IR Shield Nano Python Script. Continue reading A.IR Shield Nano Python Script – Raspberry Pi (RPi)→
The latest member of our MakeIR series of devices & kits is the A.IR Shield ESP8266/ESP32 Tx. This shield works out of the box with AnalysIR and is essentially plug & play, with additional custom Firmware options. This shield is a ‘sibling’ to our related TRx shield, and features IR multi-send only vs the send & receive of the TRx shield. The shield plugs into a Wemos D1 Mini (ESP8266) with headers or any pin-compatible clone (e.g. ESP32 Mini D1). Although designed specifically for AnalysIR, users can also upload any sketches that run on the ESP for Infrared remote control projects by customising the included firmware. A.IR Shield ESP8266/ESP32 Tx is built with only the highest quality IR components available and boasts dual Infrared emitters with configurable IR Power. The supplied firmware uniquely supports hardware PWM for sending IR signals (on ESP8266). Continue reading Preview: A.IR Shield ESP8266/ESP32 Tx, a high-end IR Shield→
The latest member of our MakeIR series of devices & kits is the A.IR Shield ESP8266 TRx.
This shield works out of the box with AnalysIR and is essentially plug & play, with additional custom Firmware options. The shield plugs into a Wemos D1 Mini (ESP8266) with headers or any pin-compatible clone. Although designed specifically for AnalysIR, users can also upload any sketches that run on the Wemos for Infrared remote control projects by customising the included firmware. A.IR Shield ESP8266 TRx is built with only the highest quality IR components available and boasts dual Infrared emitters with configurable IR Power. The supplied firmware uniquely supports hardware PWM for sending IR signals.
We have provided a link below to the product data sheet and would welcome feedback on additional, nice to have or missing features, if any. Please read the data sheet for a more detailed description of the A.IR ESP8266 TRx shield. The shield is now available to purchase via our web shop.
Although designed to work with AnalysIR, users can customise the provided firmware to send and receive IR signals via web requests, thus making integration into projects easy. More advanced users can integrate into platforms like Alexa or similar.
Also check out our example for creating your own IR send sketch for a variety of Signals (Air Conditioner, HEX, RAW & protocol based) using this shield with a Wemos D1 Mini or any ESP8266.
We received our ESP8266 NodeMCU several months ago it has been difficult to find a working example of Hardware PWM to generate crisp Infrared carrier signals. Most posts we have read suggest that there is no PWM readily available on any of the supported platforms. As we have already shown with Arduinos and the Particle Photon we figured it would be possible to use a spare UART pin on the ESP8266 NodeMCU to achieve our goal. After some initial success we encountered some watchdog timeouts/resets and it seemed like the uPWM hack would not be possible on the ESP8266 Node MCU platform. For a few weeks we ‘parked’ the effort and today we decided to try again with all of the latest and updated firmware available from the ESP8266 community via the Arduino IDE. This time we were successful and the ESP8266 NodeMCU Backdoor uPWM Hack for IR signals using works!
One of the most popular projects involving Infrared remote control, is to use an Arduino to control an Air conditioner (AC) system. However, AC signals are usually very long and take up a lot of SRAM on a standard Arduino. Experienced users will go about reverse engineering the AC protocol to make the sketch fit within the 2K Bytes of SRAM. Many hobbyists will struggle, even with the help of tools like AnalysIR to guide them. In this post we cover sending long AC Signals from Flash with IRremote. IRremote (along with IRLib) is a popular open-source library for sending and receiving IR remote control signals with Arduino. The demo code covered in this sketch extends our previous sendRAW example by demonstrating how to store many long AC signals in Flash with little or no SRAM overhead.
A few months ago a new user to AnalysIR, from Canada, asked us to assist in adding ESP8266 NodeMCU Infrared decoding over WiFi into AnalysIR. We set about making some upgrades to AnalysIR for this and in double quick time he had AnalysIR accepting IR signals from the ESP8266 over WiFi. He stressed the ease of use of the support within the Arduino IDE for ESP8266 devices and he wasn’t kidding. This motivated us to go and order an ESP8266 for US$3.60 including shipping from Aliexpress. Just the other day the NodeMCU arrived, presumably delayed somewhat by the extended XMAS holidays & celebrations, in this part of the world. So we set about porting our existing firmware for Arduino & Photon over to the new device.
Marco is a volunteer for an organization (NSW Australia) that builds custom aids for people with disability, and has recently been looking at a project to create a ‘very large button’ IR remote control for a cable TV Set Top Box (STB). The custom unit needed basic functions (Channel Up/Down, Volume Up/Down and Power On/Off). Commercially available large button remotes have buttons that are still too small and/or they have too many buttons. Soon he hit a roadblock trying to capture some difficult Foxtel signals and searched all over the web looking for a solution. Needless to say, nothing worked out for him until he came across AnalysIR via Google. Once he started Troubleshooting the Big Button Infrared remote control with AnalysIR the root cause of his problems became obvious.
In this blog post we follow up on our recent article about generation of infrared PWM from the Photon’s UART where we suggested that it may be possible to achieve something similar with the Arduino. In our previous attempt the Arduino was only able to generate PWM at 40 kHz and 33 kHz using the same approach. After some investigations we discovered a new approach which provides an even better set of results using the Arduino’s USART. Yes, we were able to generate 30, 33, 36, 38, 40 , 56 and surprisingly the illusive 455 kHz which was not possible on the Photon (using this approach). Read on for the details. Readers should also study our original series of articles on ‘softPWM‘ for a better understanding of the source code which can be downloaded below.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.