IRForum

Posted: **Tue Sep 21, 2021 1:26 pm**

AnalysIR wrote: ↑Tue Sep 21, 2021 12:35 pm If temperature is in Celsius it looks like the LSB bit of nibble5 and the top 3 bits of nibble6 with the result added to 15 to get the actual Celsius value.

I did not fully understand this part

You mean this?

Captura de pantalla 2021-09-21 a las 15.24.29.png

Posted: **Tue Sep 21, 2021 1:47 pm**

For 25 degC

Binary: 1001 =9

9+15=25

2021-09-21 14_44_22_ScreenShot.jpg

Posted: **Tue Sep 21, 2021 1:50 pm**

FYI: usually I ssee this number added to 16DegC.
So make sure you are recording correctly. Set temp to 15 and then record when you press temp+.....etc
(Some of your numbers look 1 degC out based on the rule above.

Posted: **Tue Sep 21, 2021 7:07 pm**

AnalysIR wrote: ↑Tue Sep 21, 2021 1:50 pm FYI: usually I ssee this number added to 16DegC.
So make sure you are recording correctly. Set temp to 15 and then record when you press temp+.....etc
(Some of your numbers look 1 degC out based on the rule above.

That's exactly what I did.
I went down to the minimum temperature and then I was raising the temperature from 1 to 1.
Only the change in temperature is recorded.

IRForum

Create a Custom Protocol for Ducasa AC

Re: Create a Custom Protocol for Ducasa AC

Re: Create a Custom Protocol for Ducasa AC

Re: Create a Custom Protocol for Ducasa AC

Re: Create a Custom Protocol for Ducasa AC