{"id":219,"date":"2013-08-05T16:19:39","date_gmt":"2013-08-05T15:19:39","guid":{"rendered":"http:\/\/www.analysir.com\/blog\/?p=219"},"modified":"2013-12-03T00:14:42","modified_gmt":"2013-12-03T00:14:42","slug":"update-bonus-feature-infrared-chart-analytics-for-analysir","status":"publish","type":"post","link":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/","title":{"rendered":"Update: Bonus feature – IR Chart Analytics for AnalysIR"},"content":{"rendered":"

Today we have added another bonus feature<\/b> to AnalysIR – a colour coded chart which displays the distribution of Marks & Spaces of an IR signal, including an option to select the granularity of each time slot measured (from 10 to 1,000 uSecs). We have included a screenshot below of an NEC signal at 50 uSecs time slots and the chart shows the number of Mark\/Spaces for each time range found.<\/p>\n

\"chartscreenshot\"<\/a>
Screenshot of AnalysIR Analytics feature<\/figcaption><\/figure>\n

This feature has a number of potential uses:<\/p>\n

– Makes decoding new protocols easier, because you get a quick analysis of the pulse lengths (marks & spaces) in the signal.<\/p>\n

– Can immediately show problems with your IR receiver, transmitter, encoding or decoding circuit\/logic. For example, in the chart above the space for a ‘1’ bit should be 1,690 uSecs and it’s shown on the graph as being spread out between the 1550 to 1700 time slots. This is not normally a big issue as most decoders will allow a reasonable margin of error when decoding, but it can help to highlight issues when designing.<\/p>\n

– Using the image save option means you can export the chart and use in reports, blogs or presentations.<\/p>\n

Thanks again to all our backers who used the IGG referrals option for AnalysIR. It has had a real impact. (We are now ranked in the top 10 Technology projects on IGG which have reached over 75% of target!\u00a0 – ahead of many bigger projects Keep sharing your AnalysIR referral link.\u00a0 See earlier post re referrals)<\/i><\/p>\n

And finally, keep your feature suggestions coming!<\/p>\n

 <\/p>\n

PS: You should be able to zoom in\/out of an image using CTRL ‘+’, CTRL ‘-‘ or CTRL ‘0’ in most desktop browsers.<\/i><\/p>\n","protected":false},"excerpt":{"rendered":"

Today we have added another bonus feature to AnalysIR – a colour coded chart which displays the distribution of Marks & Spaces of an IR signal, including an option to select the granularity of each time slot measured (from 10 to 1,000 uSecs). We have included a screenshot below of an NEC signal at 50 … Continue reading Update: Bonus feature – IR Chart Analytics for AnalysIR<\/span> →<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[1,3],"tags":[4,87,86,30,7,33,85],"class_list":["post-219","post","type-post","status-publish","format-standard","hentry","category-analysir-blog","category-crowdfunding-backers","tag-analysir","tag-analytics","tag-chart","tag-crowdfunding","tag-infrared","tag-ir","tag-nec"],"yoast_head":"\nUpdate: Bonus feature - IR Chart Analytics for AnalysIR - AnalysIR Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Update: Bonus feature - IR Chart Analytics for AnalysIR - AnalysIR Blog\" \/>\n<meta property=\"og:description\" content=\"Today we have added another bonus feature to AnalysIR – a colour coded chart which displays the distribution of Marks & Spaces of an IR signal, including an option to select the granularity of each time slot measured (from 10 to 1,000 uSecs). We have included a screenshot below of an NEC signal at 50 … Continue reading Update: Bonus feature – IR Chart Analytics for AnalysIR →\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/\" \/>\n<meta property=\"og:site_name\" content=\"AnalysIR Blog\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/chris.analysir\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/chris.analysir\" \/>\n<meta property=\"article:published_time\" content=\"2013-08-05T15:19:39+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2013-12-03T00:14:42+00:00\" \/>\n<meta property=\"og:image\" content=\"http:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/chartscreenshot-1024x573.jpg\" \/>\n<meta name=\"author\" content=\"User Two\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@AnalysIR\" \/>\n<meta name=\"twitter:site\" content=\"@analysir\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"User Two\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/\"},\"author\":{\"name\":\"User Two\",\"@id\":\"https:\/\/www.analysir.com\/blog\/#\/schema\/person\/16a6d94c57d4f2629096ab80a7b36e13\"},\"headline\":\"Update: Bonus feature – IR Chart Analytics for AnalysIR\",\"datePublished\":\"2013-08-05T15:19:39+00:00\",\"dateModified\":\"2013-12-03T00:14:42+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/\"},\"wordCount\":296,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/www.analysir.com\/blog\/#organization\"},\"image\":{\"@id\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#primaryimage\"},\"thumbnailUrl\":\"http:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/chartscreenshot-1024x573.jpg\",\"keywords\":[\"AnalysIR\",\"Analytics\",\"Chart\",\"Crowdfunding\",\"Infrared\",\"IR\",\"NEC\"],\"articleSection\":[\"AnalysIR Blog\",\"Crowdfunding & Backers\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/\",\"url\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/\",\"name\":\"Update: Bonus feature - IR Chart Analytics for AnalysIR - AnalysIR Blog\",\"isPartOf\":{\"@id\":\"https:\/\/www.analysir.com\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#primaryimage\"},\"thumbnailUrl\":\"http:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/chartscreenshot-1024x573.jpg\",\"datePublished\":\"2013-08-05T15:19:39+00:00\",\"dateModified\":\"2013-12-03T00:14:42+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#primaryimage\",\"url\":\"https:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/chartscreenshot.jpg\",\"contentUrl\":\"https:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/chartscreenshot.jpg\",\"width\":1364,\"height\":764},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.analysir.com\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Update: Bonus feature – IR Chart Analytics for AnalysIR\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.analysir.com\/blog\/#website\",\"url\":\"https:\/\/www.analysir.com\/blog\/\",\"name\":\"AnalysIR Blog\",\"description\":\"All about infrared remote control, IR decoding and more\",\"publisher\":{\"@id\":\"https:\/\/www.analysir.com\/blog\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.analysir.com\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.analysir.com\/blog\/#organization\",\"name\":\"AnalysIR\",\"url\":\"https:\/\/www.analysir.com\/blog\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.analysir.com\/blog\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2015\/10\/AnalysIR_and_IRToy.png\",\"contentUrl\":\"https:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2015\/10\/AnalysIR_and_IRToy.png\",\"width\":200,\"height\":200,\"caption\":\"AnalysIR\"},\"image\":{\"@id\":\"https:\/\/www.analysir.com\/blog\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/chris.analysir\",\"https:\/\/x.com\/analysir\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.analysir.com\/blog\/#\/schema\/person\/16a6d94c57d4f2629096ab80a7b36e13\",\"name\":\"User Two\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/secure.gravatar.com\/avatar\/8167f41ca01c8bf0646f87048aaf9e8f90e7d0b65650c0f8eaaf8002b288d6cb?s=96&d=identicon&r=g\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/8167f41ca01c8bf0646f87048aaf9e8f90e7d0b65650c0f8eaaf8002b288d6cb?s=96&d=identicon&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/8167f41ca01c8bf0646f87048aaf9e8f90e7d0b65650c0f8eaaf8002b288d6cb?s=96&d=identicon&r=g\",\"caption\":\"User Two\"},\"sameAs\":[\"http:\/\/www.AnalysIR.com\",\"https:\/\/www.facebook.com\/chris.analysir\",\"https:\/\/x.com\/AnalysIR\"],\"url\":\"https:\/\/www.analysir.com\/blog\/author\/analysir\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Update: Bonus feature - IR Chart Analytics for AnalysIR - AnalysIR Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/","og_locale":"en_US","og_type":"article","og_title":"Update: Bonus feature - IR Chart Analytics for AnalysIR - AnalysIR Blog","og_description":"Today we have added another bonus feature to AnalysIR – a colour coded chart which displays the distribution of Marks & Spaces of an IR signal, including an option to select the granularity of each time slot measured (from 10 to 1,000 uSecs). We have included a screenshot below of an NEC signal at 50 … Continue reading Update: Bonus feature – IR Chart Analytics for AnalysIR →","og_url":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/","og_site_name":"AnalysIR Blog","article_publisher":"https:\/\/www.facebook.com\/chris.analysir","article_author":"https:\/\/www.facebook.com\/chris.analysir","article_published_time":"2013-08-05T15:19:39+00:00","article_modified_time":"2013-12-03T00:14:42+00:00","og_image":[{"url":"http:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/chartscreenshot-1024x573.jpg","type":"","width":"","height":""}],"author":"User Two","twitter_card":"summary_large_image","twitter_creator":"@AnalysIR","twitter_site":"@analysir","twitter_misc":{"Written by":"User Two","Est. reading time":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#article","isPartOf":{"@id":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/"},"author":{"name":"User Two","@id":"https:\/\/www.analysir.com\/blog\/#\/schema\/person\/16a6d94c57d4f2629096ab80a7b36e13"},"headline":"Update: Bonus feature – IR Chart Analytics for AnalysIR","datePublished":"2013-08-05T15:19:39+00:00","dateModified":"2013-12-03T00:14:42+00:00","mainEntityOfPage":{"@id":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/"},"wordCount":296,"commentCount":0,"publisher":{"@id":"https:\/\/www.analysir.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#primaryimage"},"thumbnailUrl":"http:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/chartscreenshot-1024x573.jpg","keywords":["AnalysIR","Analytics","Chart","Crowdfunding","Infrared","IR","NEC"],"articleSection":["AnalysIR Blog","Crowdfunding & Backers"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/","url":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/","name":"Update: Bonus feature - IR Chart Analytics for AnalysIR - AnalysIR Blog","isPartOf":{"@id":"https:\/\/www.analysir.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#primaryimage"},"image":{"@id":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#primaryimage"},"thumbnailUrl":"http:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/chartscreenshot-1024x573.jpg","datePublished":"2013-08-05T15:19:39+00:00","dateModified":"2013-12-03T00:14:42+00:00","breadcrumb":{"@id":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#primaryimage","url":"https:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/chartscreenshot.jpg","contentUrl":"https:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/chartscreenshot.jpg","width":1364,"height":764},{"@type":"BreadcrumbList","@id":"https:\/\/www.analysir.com\/blog\/2013\/08\/05\/update-bonus-feature-infrared-chart-analytics-for-analysir\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.analysir.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Update: Bonus feature – IR Chart Analytics for AnalysIR"}]},{"@type":"WebSite","@id":"https:\/\/www.analysir.com\/blog\/#website","url":"https:\/\/www.analysir.com\/blog\/","name":"AnalysIR Blog","description":"All about infrared remote control, IR decoding and more","publisher":{"@id":"https:\/\/www.analysir.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.analysir.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.analysir.com\/blog\/#organization","name":"AnalysIR","url":"https:\/\/www.analysir.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.analysir.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2015\/10\/AnalysIR_and_IRToy.png","contentUrl":"https:\/\/www.analysir.com\/blog\/wp-content\/uploads\/2015\/10\/AnalysIR_and_IRToy.png","width":200,"height":200,"caption":"AnalysIR"},"image":{"@id":"https:\/\/www.analysir.com\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/chris.analysir","https:\/\/x.com\/analysir"]},{"@type":"Person","@id":"https:\/\/www.analysir.com\/blog\/#\/schema\/person\/16a6d94c57d4f2629096ab80a7b36e13","name":"User Two","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/8167f41ca01c8bf0646f87048aaf9e8f90e7d0b65650c0f8eaaf8002b288d6cb?s=96&d=identicon&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/8167f41ca01c8bf0646f87048aaf9e8f90e7d0b65650c0f8eaaf8002b288d6cb?s=96&d=identicon&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/8167f41ca01c8bf0646f87048aaf9e8f90e7d0b65650c0f8eaaf8002b288d6cb?s=96&d=identicon&r=g","caption":"User Two"},"sameAs":["http:\/\/www.AnalysIR.com","https:\/\/www.facebook.com\/chris.analysir","https:\/\/x.com\/AnalysIR"],"url":"https:\/\/www.analysir.com\/blog\/author\/analysir\/"}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/p42zhM-3x","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":232,"url":"https:\/\/www.analysir.com\/blog\/2013\/08\/12\/auto-clean-feature-infrared-signal\/","url_meta":{"origin":219,"position":0},"title":"Update: AnalysIR Auto-clean feature for IR signals","author":"User Two","date":"August 12, 2013","format":false,"excerpt":"Here is a screenshot showing the new automatic signal cleaning feature in AnalysIR. You will notice in channel 2 (yellow & red) where I have overlaid the recorded signal from CH1 (green) on top of the cleaned signal in CH2 (yellow). The green & red signal is the recorded signal\u2026","rel":"","context":"In "AnalysIR Blog"","block_context":{"text":"AnalysIR Blog","link":"https:\/\/www.analysir.com\/blog\/analysir-blog\/"},"img":{"alt_text":"AutoClean_screenshot","src":"https:\/\/i0.wp.com\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/AutoClean_screenshot-1024x575.png?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":214,"url":"https:\/\/www.analysir.com\/blog\/2013\/08\/03\/screenshot-import-feature-global-support-for-analysir\/","url_meta":{"origin":219,"position":1},"title":"Screenshot: Import feature & Global Support for AnalysIR","author":"User Two","date":"August 3, 2013","format":false,"excerpt":"Another quick update to let you know that we have also included Pronto code import, as a bonus feature today, in addition to the other 2 formats in the post earlier today. As we were testing the pronto code import, we came across another protocol from Pioneer based on the\u2026","rel":"","context":"In "AnalysIR Blog"","block_context":{"text":"AnalysIR Blog","link":"https:\/\/www.analysir.com\/blog\/analysir-blog\/"},"img":{"alt_text":"ImportScreenShot","src":"https:\/\/i0.wp.com\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/ImportScreenShot-1024x680.jpg?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":168,"url":"https:\/\/www.analysir.com\/blog\/2013\/08\/07\/well-another-truly-amazing-day-have-now-reached-60-backers-for-analysir\/","url_meta":{"origin":219,"position":2},"title":"Well another truly amazing day \u2013 have now reached 60 backers for AnalysIR.","author":"User Two","date":"August 7, 2013","format":false,"excerpt":"Today we tested out the new export feature with one of our backers who had lost a remote control for a cool RGB light, but had previously recorded the NEC (extended) codes using IRremote. As a first test of the new export facility, we were able to read the NEC\u2026","rel":"","context":"In "AnalysIR Blog"","block_context":{"text":"AnalysIR Blog","link":"https:\/\/www.analysir.com\/blog\/analysir-blog\/"},"img":{"alt_text":"rgblamp","src":"https:\/\/i0.wp.com\/www.analysir.com\/blog\/wp-content\/uploads\/2013\/11\/rgblamp.jpg?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":410,"url":"https:\/\/www.analysir.com\/blog\/2014\/02\/03\/latest-new-year-release-analysir-full-support-usb-ir-toy\/","url_meta":{"origin":219,"position":3},"title":"Latest ‘New Year’ release of AnalysIR with full support for USB IR Toy and more.","author":"User Two","date":"February 3, 2014","format":false,"excerpt":"Dublin, Ireland - 31st January 2014. We are happy to announce the latest 'New Year' release of AnalysIR to all our backers & supporters. Since the completion of the crowd-funding campaign on Indiegogo we have added over 125 updates and enhancements to AnalysIR, with more to come. A major highlight\u2026","rel":"","context":"In "AnalysIR Blog"","block_context":{"text":"AnalysIR Blog","link":"https:\/\/www.analysir.com\/blog\/analysir-blog\/"},"img":{"alt_text":"AnalysIR Screenshot","src":"https:\/\/i0.wp.com\/www.analysir.com\/blog\/wp-content\/uploads\/2014\/02\/AnalysIR-using-MSP430F5529-300x168.png?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":1055,"url":"https:\/\/www.analysir.com\/blog\/2015\/01\/06\/reverse-engineering-mitsubishi-ac-infrared-protocol\/","url_meta":{"origin":219,"position":4},"title":"Reverse engineering the Mitsubishi AC Infrared protocol","author":"User Two","date":"January 6, 2015","format":false,"excerpt":"This post is the second in a two-part series about Reverse Engineering AC Infrared protocols. This time we look at the Mitsubishi Air Conditioner IR Protocol. The project was undertaken by\u00a0 two of our users in France (Vincent & Mathieu), with the help of AnalysIR, who\u00a0 collaborated to reverse engineer\u2026","rel":"","context":"In "AnalysIR Blog"","block_context":{"text":"AnalysIR Blog","link":"https:\/\/www.analysir.com\/blog\/analysir-blog\/"},"img":{"alt_text":"Mitsubishi AC AnalysIR Screenshot","src":"https:\/\/i0.wp.com\/www.analysir.com\/blog\/wp-content\/uploads\/2014\/12\/Mitsubishi_AC_AnalysIR_Screenshot-1024x573.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.analysir.com\/blog\/wp-content\/uploads\/2014\/12\/Mitsubishi_AC_AnalysIR_Screenshot-1024x573.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.analysir.com\/blog\/wp-content\/uploads\/2014\/12\/Mitsubishi_AC_AnalysIR_Screenshot-1024x573.jpg?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":25,"url":"https:\/\/www.analysir.com\/blog\/2013\/10\/23\/crowdfunding-campaign-update-23rd-oct-2013\/","url_meta":{"origin":219,"position":5},"title":"Crowdfunding Campaign Update – 23rd Oct 2013","author":"User Two","date":"October 23, 2013","format":false,"excerpt":"Hello Backers, We have been busy over the last few weeks updating AnalysIR, for you. We hope to make the next release at the end of this month around Halloween. You may not know that Halloween originated in our part of the world, but we promise not to introduce too\u2026","rel":"","context":"In "AnalysIR Blog"","block_context":{"text":"AnalysIR Blog","link":"https:\/\/www.analysir.com\/blog\/analysir-blog\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.analysir.com\/blog\/wp-json\/wp\/v2\/posts\/219","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.analysir.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.analysir.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.analysir.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.analysir.com\/blog\/wp-json\/wp\/v2\/comments?post=219"}],"version-history":[{"count":3,"href":"https:\/\/www.analysir.com\/blog\/wp-json\/wp\/v2\/posts\/219\/revisions"}],"predecessor-version":[{"id":223,"href":"https:\/\/www.analysir.com\/blog\/wp-json\/wp\/v2\/posts\/219\/revisions\/223"}],"wp:attachment":[{"href":"https:\/\/www.analysir.com\/blog\/wp-json\/wp\/v2\/media?parent=219"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.analysir.com\/blog\/wp-json\/wp\/v2\/categories?post=219"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.analysir.com\/blog\/wp-json\/wp\/v2\/tags?post=219"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}